1/5 XBS013P11R-G schottky barrier diode, 100ma, 30v type product name package order unit XBS013P11R-G * sod-923 8,000pcs/reel * the ?-g? suffix denotes halogen and antimony free as well as being fully eu rohs compliant. absolute maximum ratings ta=25 parameter symbol ratings units reverse voltage (dc) v r 30 v forward current (average) i f(av) 0.1 a non continuous forward surge current (8.3 ms single half-sine wave) i fsm 1 a junction temperature tj 125 storage temperature tstg -55 to +125 electrical characteristics ta=25 parameter symbol test conditions limits units min. typ. max. forward voltage v f i f =10ma - - 0.35 v reverse current i r v r =10v - - 10 a etr16024-001 features low forward voltage ultra small package environmentally friendly : eu rohs compliant, pb free a pplications low current rectification product name j packaging information sod-923 unit : inch (mm) marking
2/5 XBS013P11R-G typical performance characteristics (1) forward current vs. forward voltage (2) reverse current vs. reverse voltage 0.1 1 10 100 0 0.2 0.4 0.6 forward voltage: v f (v) forward current: i f (ma) 25 -25 75 ta=125 0.01 0.1 1 10 100 1000 0102030 reverse voltage: v r (v) reverse current: i r (a) 25 75 ta=125 (3) terminal capacitance vs. reverse voltage (4) average forward current vs. operating temperature 0 5 10 15 20 25 30 0102030 reverse voltage: v r (v) terminal capacitance: ct (pf) 0.00 0.05 0.10 0.15 0.20 0 50 100 150 operating temperature: ta () average forward current: i f(ave) (a) notes on use 1. please use this ic within the absolute maximum ratings. even within the ratings, in case of high load use continuously such as high temperat ure, high voltage, high current and thermal stress may cause reliability degradation of the ic. 2. torex places an importance on improv ing our products and their reliability. we request that users incorporate fail-sa fe designs and post-aging protec tion treatment when using torex products in their syst ems.
3/5 XBS013P11R-G reference pattern layout sod-923 unit : inch (mm)
4/5 XBS013P11R-G taping specifications sod-923 symbol mm d0 1.50 0.10 d1 0.40 0.05 e 1.75 0.10 f 3.50 0.05 p0 4.00 0.10 p1 2.00 0.05 p2 2.00 0.05 w 8.00 + 0.3 - 0.1
5/5 XBS013P11R-G 1. the product and product specific ations contained herein are subject to change without notice to improve performance characteristics. consult us, or our representatives befor e use, to confirm that the information in this datasheet is up to date. 2. the information in this datasheet is intended to illustrate the operation a nd characteristics of our products. we neither make warranties or repres entations with respect to the accuracy or completeness of the information contained in this dat asheet nor grant any license to any intellectual property rights of ours or any third party concerning with the information in this datasheet. 3. applicable export control laws and regulations should be complied and the procedures required by such laws and regulations should also be followed, when the product or any information contained in this datasheet is exported. 4. the product is neither intended nor warranted for use in equipment of systems which require extremely high levels of quality and/or reliability a nd/or a malfunction or failure which may cause loss of human life, bodily injury, serious property damage including but not limited to devices or equipment used in 1) nuclear facilities, 2) aerospace industry, 3) medical fa cilities, 4) automobile industry and other transportation industry and 5) safety device s and safety equipment to control combustions and explosions. do not use the product for the above us e unless agreed by us in writing in advance. 5. although we make continuous efforts to im prove the quality and reliability of our products; nevertheless semiconductors are likely to fail with a certain probability. so in order to prevent personal injury and/or property damage resulting from such failure, customers are required to incorporate adequate safety measures in their des igns, such as system fail safes, redundancy and fire prevention features. 6. our products are not designed to be radiation-resistant. 7. please use the product listed in this datasheet within the specified ranges. 8. we assume no responsibility for damage or loss due to abnormal use. 9. all rights reserved. no part of this datasheet may be copied or reproduced unless agreed by torex semiconductor ltd in writing in advance. torex semiconductor ltd.
|
